Chapter 1 Physics
•
0 likes•6 views
Work is the product of the applied force and the distance moved in the direction of the force. The SI unit of work is the joule. Power is the rate at which work is done, and is measured in watts. When comparing the power of engines, one can either do more work in the same time or do the same work in less time.
Report
Share
Report
Share
![[object Object],[object Object],[object Object],[object Object],[object Object],[object Object]](https://image.slidesharecdn.com/power-101218094110-phpapp02/85/Chapter-1-Physics-1-320.jpg)
![[object Object],[object Object],[object Object]](data:image/gif;base64,R0lGODlhAQABAIAAAAAAAP///yH5BAEAAAAALAAAAAABAAEAAAIBRAA7)
Recommended
Forces gr.7
Mass is the amount of matter in an object and is measured in grams. A force can change the position, speed, direction, or shape of an object. Weight is the pull of gravity on an object and is measured in Newtons. There are two types of forces - contact forces which act when objects touch, and non-contact forces which act over a distance like magnetic or gravitational forces. Balanced forces cancel each other out while unbalanced forces cause changes in speed or direction.
Work Power and Energy
Work is defined as a force acting on an object and moving it through a displacement. It is calculated as work = force x displacement. The SI unit of work is the joule. Work can be positive when force and displacement are in the same direction, zero when they are perpendicular, and negative when opposite. Power is the rate of doing work and is calculated as power = work/time, with the unit watt equal to joule/second. Energy is the ability to do work and has the unit joule.
Work & Power
Work is defined as the transfer of energy when a force causes an object to move. Power is the rate at which work is done and is calculated by dividing the work by the time taken. Machines make work easier by changing the direction or magnitude of the applied force, allowing tasks to be completed with less exertion. They do not reduce the total amount of work done.
Force and work notes
TEKS 6.8E and 7.7A discuss how inclined planes and pulleys can be used to change the amount of force needed to move an object. A force is a push or pull on an object, and work is done when a force moves an object in the same direction. The unit for measuring force is the Newton, while the unit for measuring work is the Joule. Work can be calculated using the formula: Work = Force x Distance. Machines can change the amount, direction, and distance of force. Inclined planes and pulleys allow you to exert less input force over a greater distance to move a load.
Acceleration & Momentum
1. The document discusses concepts related to motion including speed, velocity, acceleration, momentum, and conservation of momentum. It provides definitions and formulas for calculating these values.
2. Examples are given to demonstrate how to calculate speed, relative velocity between two objects, acceleration, and momentum. Factors like mass, velocity, and time are considered.
3. The conservation of momentum is explained as the principle that the total momentum of a system remains constant if no external forces act on it. Collisions are used to illustrate how momentum can be transferred between objects.
Work and Power
Work in physics refers to the transfer of energy when a force causes an object to move. The amount of work done depends on both the magnitude of the applied force and the distance moved in the direction of the force, according to the formula: Work = Force x Distance. One joule of work is done when a one newton force moves an object one meter in the direction of the force. Work is a scalar quantity rather than a vector. No work is done if the net force on an object is zero, such as when pushing against a wall with no resulting motion.
Motion and speed notes
TEKS 6.8B, 6.8C, and 6.8D outline standards related to identifying changes in an object's position, direction, and speed when acted on by unbalanced forces, calculating average speed using distance and time measurements, and measuring and graphing changes in motion. Forces are needed to start or stop an object's motion or change its speed or direction. Speed is calculated by dividing distance by time and can be shown through graphs of changing motion over time. Forces can cause an object's speed to increase, decrease, or stop depending on whether the net force is balanced or unbalanced.
Advanced/Notes 6.1
Work is defined as the distance an object is moved in the direction of the applied force. The unit of work is the Joule. Work is calculated by multiplying the force acting on an object by the distance the object moves in the direction of the force. Forces acting opposite to the direction of motion do negative work. To solve work problems, draw a free body diagram, choose a coordinate system, determine any unknown forces using Newton's laws, calculate the work done by each force, and add the work values to determine the net work.
Recommended
Forces gr.7
Mass is the amount of matter in an object and is measured in grams. A force can change the position, speed, direction, or shape of an object. Weight is the pull of gravity on an object and is measured in Newtons. There are two types of forces - contact forces which act when objects touch, and non-contact forces which act over a distance like magnetic or gravitational forces. Balanced forces cancel each other out while unbalanced forces cause changes in speed or direction.
Work Power and Energy
Work is defined as a force acting on an object and moving it through a displacement. It is calculated as work = force x displacement. The SI unit of work is the joule. Work can be positive when force and displacement are in the same direction, zero when they are perpendicular, and negative when opposite. Power is the rate of doing work and is calculated as power = work/time, with the unit watt equal to joule/second. Energy is the ability to do work and has the unit joule.
Work & Power
Work is defined as the transfer of energy when a force causes an object to move. Power is the rate at which work is done and is calculated by dividing the work by the time taken. Machines make work easier by changing the direction or magnitude of the applied force, allowing tasks to be completed with less exertion. They do not reduce the total amount of work done.
Force and work notes
TEKS 6.8E and 7.7A discuss how inclined planes and pulleys can be used to change the amount of force needed to move an object. A force is a push or pull on an object, and work is done when a force moves an object in the same direction. The unit for measuring force is the Newton, while the unit for measuring work is the Joule. Work can be calculated using the formula: Work = Force x Distance. Machines can change the amount, direction, and distance of force. Inclined planes and pulleys allow you to exert less input force over a greater distance to move a load.
Acceleration & Momentum
1. The document discusses concepts related to motion including speed, velocity, acceleration, momentum, and conservation of momentum. It provides definitions and formulas for calculating these values.
2. Examples are given to demonstrate how to calculate speed, relative velocity between two objects, acceleration, and momentum. Factors like mass, velocity, and time are considered.
3. The conservation of momentum is explained as the principle that the total momentum of a system remains constant if no external forces act on it. Collisions are used to illustrate how momentum can be transferred between objects.
Work and Power
Work in physics refers to the transfer of energy when a force causes an object to move. The amount of work done depends on both the magnitude of the applied force and the distance moved in the direction of the force, according to the formula: Work = Force x Distance. One joule of work is done when a one newton force moves an object one meter in the direction of the force. Work is a scalar quantity rather than a vector. No work is done if the net force on an object is zero, such as when pushing against a wall with no resulting motion.
Motion and speed notes
TEKS 6.8B, 6.8C, and 6.8D outline standards related to identifying changes in an object's position, direction, and speed when acted on by unbalanced forces, calculating average speed using distance and time measurements, and measuring and graphing changes in motion. Forces are needed to start or stop an object's motion or change its speed or direction. Speed is calculated by dividing distance by time and can be shown through graphs of changing motion over time. Forces can cause an object's speed to increase, decrease, or stop depending on whether the net force is balanced or unbalanced.
Advanced/Notes 6.1
Work is defined as the distance an object is moved in the direction of the applied force. The unit of work is the Joule. Work is calculated by multiplying the force acting on an object by the distance the object moves in the direction of the force. Forces acting opposite to the direction of motion do negative work. To solve work problems, draw a free body diagram, choose a coordinate system, determine any unknown forces using Newton's laws, calculate the work done by each force, and add the work values to determine the net work.
Physics: Work
The product of force and the amount of displacement along the line of action of that force.
Units: ft . lbs (horsepower)
Newton•meter (Joule) e
2627970156341125
Friction is a force that resists the motion of objects that are in contact with each other. There are two main types of frictional forces - static friction and kinetic friction. Static friction is the force needed to initiate motion between two stationary surfaces, while kinetic friction is the force required to maintain motion between two surfaces already in motion relative to each other. The document demonstrates how to calculate the coefficient of static friction between two surfaces by dividing the maximum force needed to initiate motion by the weight of the object. The coefficient of friction quantifies the amount of friction between two surfaces and is important for designing mechanical systems.
Force and work notes 2
The document discusses force, work, and simple machines. It defines force and work, and notes that work is calculated as force multiplied by distance (W=Fxd). It also explains that inclined planes and pulleys can be used to change the amount of force needed to move an object by altering the distance or direction of force. Inclined planes trade off less input force for greater distance, while pulleys can change force amount and direction by increasing distance.
Basic mechanical engineering 1
This document provides an introduction to basic mechanical engineering concepts including statics. It outlines key topics such as mechanics, scalars and vectors, forces, and two-dimensional force systems. Forces are classified as contact or body forces. Rectangular components, moments, couples, and resultants are discussed for analyzing two and three-dimensional force systems. Numerical problems are provided as examples and exercises.
Forces and machines
Forces can be pushes or pulls that cause motion or changes in motion. Gravity and magnetism are non-contact forces - gravity pulls objects toward the center of Earth, while magnetism is the force produced by magnets. A force puts an object in motion, stops its motion, or changes the way it moves. Applying more force causes an object to move faster or allows heavier objects to be moved. Machines are tools that make work easier. Simple machines include levers, pulleys, and inclined planes, while complex machines have multiple simple machines working together.
Basic mechanical engineering 2
This document summarizes key concepts about moments:
1) A moment is a measure of a force's tendency to cause rotation about a point or axis. It occurs when a force does not pass through the body's centroid.
2) The magnitude of a moment is directly proportional to the force and the perpendicular distance between the force's line of action and the center of moments (moment arm).
3) Examples are provided to calculate moments using the formula: Moment = Force x Distance. Assignments related to moments and couples are listed.
Work And Simple Machines
Work is defined scientifically as a force causing an object to move in the direction of the force. Simple machines like levers, pulleys, and inclined planes allow people to do work more easily by increasing force or distance of movement. They provide mechanical advantage by changing the direction or magnitude of force. Common simple machines are the lever, wheel and axle, inclined plane, wedge, screw, and pulley. Each machine trades off either force or distance depending on its class.
Acceleration and force 2010
This document discusses acceleration and forces. It defines acceleration as a change in an object's speed or direction over time. Acceleration is calculated by the change in velocity divided by time. An object accelerates when the net force acting upon it is unbalanced. The greater the net force, the greater the acceleration will be. Gravity and mass affect acceleration as well. Gravity causes free-falling objects to accelerate at 9.8 m/s^2. The more massive an object is, the more force is needed to accelerate it.
Presentation7
This document contains 5 multiple choice questions about forces and dynamics from a chapter on exercise. The questions cover effects of forces, types of forces that can attract but not repel objects, forces that require contact between objects, factors that increase the work done by a force, and calculating the power exerted by a man walking with a certain mass, force, distance, and time.
Forces
The document discusses balanced and unbalanced forces, friction, and Newton's laws of motion. It provides the following key points:
1. When the net force on an object is zero, it will remain at rest or continue moving at a constant velocity. An unbalanced net force will cause acceleration or deceleration.
2. Friction opposes the relative motion between surfaces. It can be useful or a nuisance, and ways to reduce friction are discussed.
3. Newton's third law states that for every action there is an equal and opposite reaction. A free-body diagram shows only the forces acting on a single body.
Work and power
Work is done when a force causes an object to move in the direction of the force. Work can be calculated using the formula Work = Force x Distance. Work is measured in joules, named after scientist James Joule. Power is a measure of how quickly work is done and is calculated by dividing work by time. Power is measured in watts, named after James Watt who helped advance steam engines.
Work & Simple Machines
This document discusses simple machines and how they make work easier. It defines work as a force moving an object over a distance. The six basic simple machines that reduce the force needed for work are the inclined plane, wedge, screw, lever, wheel and axle, and pulley. Each machine works by either changing the size or direction of the applied force. Compound machines combine two or more simple machines to accomplish work.
Work
1) Work is defined as a force acting upon an object to cause displacement and is expressed as the product of force and displacement in the direction of force.
2) The work done on a body depends on the magnitude of the force and the displacement through which the body moves in the direction of force.
3) As the angle between the direction of force and motion of the body increases, less work is done along the direction of motion since less of the force is acting in that direction.
Work and Machines
The document discusses different types of work and simple machines. It begins by defining work as the transfer of energy through a force causing an object to move in the direction of the force. It then describes six simple machines: the lever, pulley, wheel and axle, inclined plane, wedge, and screw. The summary provides the definitions of each machine, specifically that a lever is a bar that pivots on a fulcrum, a pulley allows a rope or chain to pass over a wheel, and a wheel and axle consist of two circular objects of different sizes. Compound machines are made up of combinations of two or more simple machines.
work energy power for class ix
Allah created natural beauty. Natural beauty includes Glen Canyon Dam on the Colorado River, which demonstrates tremendous water pressure. Work is defined as the force applied over a distance in the same direction, and is measured in joules. Work is a scalar quantity despite force and displacement being vectors.
Chapter 7 dynamics
The document discusses different types of forces including frictional force, gravitational force, electrostatic force, magnetic force, and electric force. It explains that a force is a push or pull that can change an object's shape, position, speed, or direction of motion. Forces can be measured using a spring balance and the unit of force is the Newton. The document also discusses work and power, defining work as energy transferred by a force causing movement over a distance.
3-Point Bending project
This document describes the design of a 3-point bending device to measure beam deflection. Several proposed solutions were considered, including a computerized model and design with fixed supports and movable load hook. However, these had issues like complexity, inability to measure at the load point, and reaction forces acting on a circular not point surface. The final design uses knife-edge supports and a different load application method. Testing involved applying fixed loads at different positions and measuring deflection to study beam behavior and determine material properties. Practical problems in implementation included orienting the knife edges perpendicular to the beam and support tip accuracy.
Forces
1) Forces are pushes or pulls that can cause an object at rest to move or change direction, and are represented by arrows.
2) Balanced forces do not change an object's motion, while unbalanced forces cause a net force and change in motion.
3) There are four types of friction: static, sliding, rolling, and fluid, each opposing different types of motion between objects or objects in motion.
Newton's Laws Cheat sheet
This document provides a cheat sheet for key concepts in Newton's Laws of motion for an AP Physics exam. It defines important terms like vectors, forces, and equations of motion. It also summarizes the three laws of motion, distinguishing between static and dynamic equilibrium. An example problem demonstrates how to apply Newton's Second Law to calculate acceleration given mass and net force.
Work, energy and power
Work is done when a force causes an object to move in the direction of the force. Work is measured in joules, which is equal to applying a force of 1 newton over a distance of 1 meter. Power is the rate at which work is done and is measured in watts. The work-energy theorem states that work done on an object transforms into a change in the object's kinetic energy. Various types of energy, such as gravitational potential energy, kinetic energy, and heat can be transformed into one another but the total amount of energy remains constant due to the law of conservation of energy.
Force_and_Work.pptx
Machines use forces to do work by transferring energy to objects. Work is calculated as the force applied multiplied by the distance moved in the direction of the force. A machine provides mechanical advantage by allowing a smaller input force to produce a larger output force, making tasks easier. Levers are an example of a simple machine that can multiply force - the mechanical advantage is the ratio of the load force to effort force, which is greater than one if the distance the effort acts is greater than the distance the load moves. This means the effort force can be less than the load, reducing the amount of force needed to do the work.
Ch14.1 powerpoint
The document defines work as the product of force and distance. Work is done when a force causes an object to move in the direction of the force. No work is done if there is no movement. Power is defined as the rate at which work is done, or the amount of work done per unit time. Several examples are provided to demonstrate calculating work and power using the relevant formulas. Horsepower is also defined as a common unit of power equivalent to approximately 746 watts.
More Related Content
What's hot
Physics: Work
The product of force and the amount of displacement along the line of action of that force.
Units: ft . lbs (horsepower)
Newton•meter (Joule) e
2627970156341125
Friction is a force that resists the motion of objects that are in contact with each other. There are two main types of frictional forces - static friction and kinetic friction. Static friction is the force needed to initiate motion between two stationary surfaces, while kinetic friction is the force required to maintain motion between two surfaces already in motion relative to each other. The document demonstrates how to calculate the coefficient of static friction between two surfaces by dividing the maximum force needed to initiate motion by the weight of the object. The coefficient of friction quantifies the amount of friction between two surfaces and is important for designing mechanical systems.
Force and work notes 2
The document discusses force, work, and simple machines. It defines force and work, and notes that work is calculated as force multiplied by distance (W=Fxd). It also explains that inclined planes and pulleys can be used to change the amount of force needed to move an object by altering the distance or direction of force. Inclined planes trade off less input force for greater distance, while pulleys can change force amount and direction by increasing distance.
Basic mechanical engineering 1
This document provides an introduction to basic mechanical engineering concepts including statics. It outlines key topics such as mechanics, scalars and vectors, forces, and two-dimensional force systems. Forces are classified as contact or body forces. Rectangular components, moments, couples, and resultants are discussed for analyzing two and three-dimensional force systems. Numerical problems are provided as examples and exercises.
Forces and machines
Forces can be pushes or pulls that cause motion or changes in motion. Gravity and magnetism are non-contact forces - gravity pulls objects toward the center of Earth, while magnetism is the force produced by magnets. A force puts an object in motion, stops its motion, or changes the way it moves. Applying more force causes an object to move faster or allows heavier objects to be moved. Machines are tools that make work easier. Simple machines include levers, pulleys, and inclined planes, while complex machines have multiple simple machines working together.
Basic mechanical engineering 2
This document summarizes key concepts about moments:
1) A moment is a measure of a force's tendency to cause rotation about a point or axis. It occurs when a force does not pass through the body's centroid.
2) The magnitude of a moment is directly proportional to the force and the perpendicular distance between the force's line of action and the center of moments (moment arm).
3) Examples are provided to calculate moments using the formula: Moment = Force x Distance. Assignments related to moments and couples are listed.
Work And Simple Machines
Work is defined scientifically as a force causing an object to move in the direction of the force. Simple machines like levers, pulleys, and inclined planes allow people to do work more easily by increasing force or distance of movement. They provide mechanical advantage by changing the direction or magnitude of force. Common simple machines are the lever, wheel and axle, inclined plane, wedge, screw, and pulley. Each machine trades off either force or distance depending on its class.
Acceleration and force 2010
This document discusses acceleration and forces. It defines acceleration as a change in an object's speed or direction over time. Acceleration is calculated by the change in velocity divided by time. An object accelerates when the net force acting upon it is unbalanced. The greater the net force, the greater the acceleration will be. Gravity and mass affect acceleration as well. Gravity causes free-falling objects to accelerate at 9.8 m/s^2. The more massive an object is, the more force is needed to accelerate it.
Presentation7
This document contains 5 multiple choice questions about forces and dynamics from a chapter on exercise. The questions cover effects of forces, types of forces that can attract but not repel objects, forces that require contact between objects, factors that increase the work done by a force, and calculating the power exerted by a man walking with a certain mass, force, distance, and time.
Forces
The document discusses balanced and unbalanced forces, friction, and Newton's laws of motion. It provides the following key points:
1. When the net force on an object is zero, it will remain at rest or continue moving at a constant velocity. An unbalanced net force will cause acceleration or deceleration.
2. Friction opposes the relative motion between surfaces. It can be useful or a nuisance, and ways to reduce friction are discussed.
3. Newton's third law states that for every action there is an equal and opposite reaction. A free-body diagram shows only the forces acting on a single body.
Work and power
Work is done when a force causes an object to move in the direction of the force. Work can be calculated using the formula Work = Force x Distance. Work is measured in joules, named after scientist James Joule. Power is a measure of how quickly work is done and is calculated by dividing work by time. Power is measured in watts, named after James Watt who helped advance steam engines.
Work & Simple Machines
This document discusses simple machines and how they make work easier. It defines work as a force moving an object over a distance. The six basic simple machines that reduce the force needed for work are the inclined plane, wedge, screw, lever, wheel and axle, and pulley. Each machine works by either changing the size or direction of the applied force. Compound machines combine two or more simple machines to accomplish work.
Work
1) Work is defined as a force acting upon an object to cause displacement and is expressed as the product of force and displacement in the direction of force.
2) The work done on a body depends on the magnitude of the force and the displacement through which the body moves in the direction of force.
3) As the angle between the direction of force and motion of the body increases, less work is done along the direction of motion since less of the force is acting in that direction.
Work and Machines
The document discusses different types of work and simple machines. It begins by defining work as the transfer of energy through a force causing an object to move in the direction of the force. It then describes six simple machines: the lever, pulley, wheel and axle, inclined plane, wedge, and screw. The summary provides the definitions of each machine, specifically that a lever is a bar that pivots on a fulcrum, a pulley allows a rope or chain to pass over a wheel, and a wheel and axle consist of two circular objects of different sizes. Compound machines are made up of combinations of two or more simple machines.
work energy power for class ix
Allah created natural beauty. Natural beauty includes Glen Canyon Dam on the Colorado River, which demonstrates tremendous water pressure. Work is defined as the force applied over a distance in the same direction, and is measured in joules. Work is a scalar quantity despite force and displacement being vectors.
Chapter 7 dynamics
The document discusses different types of forces including frictional force, gravitational force, electrostatic force, magnetic force, and electric force. It explains that a force is a push or pull that can change an object's shape, position, speed, or direction of motion. Forces can be measured using a spring balance and the unit of force is the Newton. The document also discusses work and power, defining work as energy transferred by a force causing movement over a distance.
3-Point Bending project
This document describes the design of a 3-point bending device to measure beam deflection. Several proposed solutions were considered, including a computerized model and design with fixed supports and movable load hook. However, these had issues like complexity, inability to measure at the load point, and reaction forces acting on a circular not point surface. The final design uses knife-edge supports and a different load application method. Testing involved applying fixed loads at different positions and measuring deflection to study beam behavior and determine material properties. Practical problems in implementation included orienting the knife edges perpendicular to the beam and support tip accuracy.
Forces
1) Forces are pushes or pulls that can cause an object at rest to move or change direction, and are represented by arrows.
2) Balanced forces do not change an object's motion, while unbalanced forces cause a net force and change in motion.
3) There are four types of friction: static, sliding, rolling, and fluid, each opposing different types of motion between objects or objects in motion.
Newton's Laws Cheat sheet
This document provides a cheat sheet for key concepts in Newton's Laws of motion for an AP Physics exam. It defines important terms like vectors, forces, and equations of motion. It also summarizes the three laws of motion, distinguishing between static and dynamic equilibrium. An example problem demonstrates how to apply Newton's Second Law to calculate acceleration given mass and net force.
What's hot (19)
Similar to Chapter 1 Physics
Work, energy and power
Work is done when a force causes an object to move in the direction of the force. Work is measured in joules, which is equal to applying a force of 1 newton over a distance of 1 meter. Power is the rate at which work is done and is measured in watts. The work-energy theorem states that work done on an object transforms into a change in the object's kinetic energy. Various types of energy, such as gravitational potential energy, kinetic energy, and heat can be transformed into one another but the total amount of energy remains constant due to the law of conservation of energy.
Force_and_Work.pptx
Machines use forces to do work by transferring energy to objects. Work is calculated as the force applied multiplied by the distance moved in the direction of the force. A machine provides mechanical advantage by allowing a smaller input force to produce a larger output force, making tasks easier. Levers are an example of a simple machine that can multiply force - the mechanical advantage is the ratio of the load force to effort force, which is greater than one if the distance the effort acts is greater than the distance the load moves. This means the effort force can be less than the load, reducing the amount of force needed to do the work.
Ch14.1 powerpoint
The document defines work as the product of force and distance. Work is done when a force causes an object to move in the direction of the force. No work is done if there is no movement. Power is defined as the rate at which work is done, or the amount of work done per unit time. Several examples are provided to demonstrate calculating work and power using the relevant formulas. Horsepower is also defined as a common unit of power equivalent to approximately 746 watts.
9th Work & Energy.ppt
The document defines key physics concepts related to work, energy, and power:
1) Work is the product of the force applied and the distance an object is displaced in the direction of the force. Work is measured in joules and can be positive, negative, or zero depending on the angle between the force and displacement.
2) Kinetic energy is the energy of an object due to its motion, calculated as one-half mass times velocity squared. Potential energy is stored energy due to an object's position in a force field, calculated as mass times gravitational field strength times height.
3) Power is defined as the rate at which work is done and is measured in watts, with one watt
Work and Power.pptx
1) Work is defined as using a force to move an object a distance in the same direction. Work is calculated as Force x Distance and does not involve time.
2) The joule is the unit used to measure work and energy. One newton of force moving an object one meter is one joule.
3) Power is the rate of doing work and is calculated as Work/Time. It measures how quickly work is done. The watt is the unit of power, where one watt equals one joule per second.
Work and energy. Practical Problems on Work and Energy
1. Work is defined as the product of the applied force and the displacement of an object in the direction of the force. Only the component of force parallel to the object's motion does work.
2. The basic work equation is Work = Force x Displacement. Different types of work problems can involve overcoming friction, gravity, or no forces.
3. Energy is the ability to do work and exists in various forms like kinetic and potential energy. The work-energy theorem states that the work done on an object equals its change in kinetic energy.
Physics Presentation
Work is defined as a force acting on an object and moving it through a displacement. It is calculated as work equals force times distance (W=Fd). The SI unit for work is the joule. Work can be positive when force and displacement are in the same direction, negative when they are in opposite directions, and zero when the force is perpendicular to displacement. Power is the rate of doing work and is calculated as work divided by time. Energy is the ability to do work and its SI unit is also the joule.
Work force energy ppt final wiki
The document discusses various types of energy and forces, explaining that energy cannot be created or destroyed, only changed in form, and defines work as the ability to cause change when a force acts over a distance. It also explains Newton's three laws of motion, including that an object at rest or in motion will remain as such unless acted on by an unbalanced force, and that for every action there is an equal and opposite reaction. The document provides examples and formulas to help understand these concepts of energy, forces, and motion.
Chapter 6 - Giancoli - Work and Energy
This document provides an overview of work, energy, and potential energy concepts from a physics textbook chapter. It defines key terms like kinetic energy, potential energy, conservative forces, and introduces the work-energy theorem. Examples of calculating work done by gravity and changes in kinetic and potential energy are presented. The history of Joule's experiment demonstrating the equivalence between work, heat, and energy transfer is briefly described.
Interactive Textbook Ch. 8 Work and Machines
Machines make work easier by reducing the amount of force needed. A machine transfers the input force applied over a greater distance to increase the output force. This allows the same amount of work to be done with less input force. For example, a screwdriver acts as a lever to pry open a paint can lid, applying a smaller force over a greater distance to generate a larger output force on the lid.
Work.pptx
Work in physics has a specific definition. It is the product of the force applied and the distance an object moves in the direction of the force. Work is done only when a force causes displacement. Work is a scalar quantity measured in joules, where 1 joule is the work done by a 1 newton force moving an object 1 meter. The document provides examples of calculating work from given force and displacement values.
Work & Energy
Explain work, energy and power. The Law of Conservation of Energy is utilized as well as conservative and non conservative systems.
**More good stuff available at:
www.wsautter.com
and
http://www.youtube.com/results?search_query=wnsautter&aq=f
T - Work, Power & Energy
Work is defined as the product of the force applied and the distance moved in the direction of the force. Positive work is when movement is in the direction of the force, and negative when against it. Power is the rate at which work is done, defined as work divided by time. There are two types of mechanical energy: kinetic energy, which is the energy from motion; and potential energy, which is the energy from height or stored energy. The law of conservation of energy states that energy cannot be created or destroyed, only changed from one form to another.
Physics Chapter 10 section 1 Work, Energy, and Power
Work is done when a force causes an object to move through a displacement. Work can change the energy of a system based on the work-energy theorem, which states that work done on a system equals the change in its energy. Power is the rate at which work is done or energy is transferred, measured in watts. It is calculated by dividing work by time or by multiplying force, velocity, and the cosine of the angle between them.
Work And Power
This document defines work and how to calculate it. It explains that work requires a force to be exerted on an object in the direction of its motion over some distance. It provides the formula for work (Work = Force x Distance) and defines the units of Newtons, meters, and Joules. It also defines power as the rate of doing work, and gives the formula to calculate power (Power = Work / Time). Several examples are provided to demonstrate calculating work and power.
Work, energy and power
Work is defined as the product of the force applied to an object and the displacement of the object in the direction of the force. Work is only done when there is a component of force in the direction of motion. No work is done when the force is perpendicular to the displacement. Work has units of joules (J), which is calculated as newton-meters (N⋅m). Examples are provided to demonstrate calculating work done by applying different forces over various displacements and angles.
Work
- Work is done when a force causes an object to move in the direction of the force. No work is done if there is no movement.
- Work (W) is calculated as the product of the magnitude of the force (F) and the magnitude of displacement (d) in the direction of the force.
- Power is the rate at which work is done and is calculated as work (W) divided by time (t). It is measured in watts, with 1 watt equaling 1 joule per second.
Work, Energy, and Power
This document discusses work, energy, and their related concepts. It defines work as the product of the applied force and the distance moved in the direction of the force. Work is measured in joules, which is equal to a newton-meter. For work to be done, an object must move a distance while a constant force is applied in the same direction. Kinetic energy is the energy of motion, while potential energy is stored energy due to an object's position or state. Kinetic energy depends on environment but potential energy does not. Examples of each are also provided along with their determining factors and units.
work and power calculate.pdf
1. Work is done when a force causes an object to move in the direction of the force. Work is calculated as Force x Distance. No work is done if there is movement but no net distance change.
2. Power is a measure of the rate at which work is done. It is calculated as Work / Time. Two people can do the same amount of work but one can use more power by completing the work in less time.
3. Common units for work and energy are joules (J) and for power are watts (W). One watt equals one joule of work per second. Power ratings on appliances are often given in kilowatts (kW).
class 11 physics work energy and power study material free pdf download
class 11 physics work energy and power study material free pdf downloadVivekanand Anglo Vedic Academy
Welcome to the fascinating world of Work, Energy, and Power! In the realm of physics, these concepts form the cornerstone of understanding how objects interact with each other and how energy is transformed within systems. From the motion of everyday objects to the dynamics of celestial bodies, the principles of work, energy, and power are ubiquitous, shaping the very fabric of the universe.
For more information, visit-www.vavaclasses.comSimilar to Chapter 1 Physics (20)
Work and energy. Practical Problems on Work and Energy
Work and energy. Practical Problems on Work and Energy
Physics Chapter 10 section 1 Work, Energy, and Power
Physics Chapter 10 section 1 Work, Energy, and Power
class 11 physics work energy and power study material free pdf download
class 11 physics work energy and power study material free pdf download